HyperX HX421C14FB/16 is a 2G x 64-bit (16GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. Learn More

HyperX HX421C14FB2/8 is a 1G x 64-bit (8GB) DDR4-2133 CL14
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on
eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel Extreme Memory Profiles (Intel XMP) 2.0.
Each module has been tested to run at DDR4-2133 at a low latency
timing of 14-14-14 at 1.2V.

Learn More

HyperX HX421C14FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Learn More

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin

Learn More

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin

Learn More

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin

Learn More

This document describes ValueRAM's 1G x 64-bit (8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. This 260-pin DIMM uses gold contact fingers. Learn More

Kingston have been manufacturing memory upgrades for over 25 years. If youre looking to upgrade your machine with a memory upgrade or replacement, then choose a Kingston upgrade. With over 25 years experience of manufacturing memory with an unrivalled RanD processes a Kingston upgrade is the best choice for your machine.

Learn More

This document describes ValueRAM's 2G x 64-bit (16GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. This 260-pin DIMM uses gold contact fingers. Learn More

PC3-12800 DDR3-1600 UDIMM memory offerings let you upgrade your system's standard memory capacity to improve overall ThinkCentre or ThinkStation system performance. Adding additional memory is a cost-effective way to help boost your system's performance and enhance its ability to run more programs simultaneously.

Learn More

PC3-12800 DDR3-1600 SODIMM memory offerings let you upgrade your system's standard memory capacity to improve overall ThinkPad or ThinkCentre system performance. Adding additional memory is a cost-effective way to help boost your system's performance and enhance its ability to run more programs simultaneously.

Learn More

Adding more memory increases system performance. This Lenovo 4GB DDR4 2133Mhz SoDIMM Memory allows you to upgrade your system’s performance and enhance its ability to run more programs simultaneously. Test-proven 100% compatibility listed for supported systems.

Learn More

Adding more memory increases system performance. This Lenovo 8GB DDR4 2133Mhz Non ECC UDIMM Memory are low power, high-speed operation memory that use DDR4 SDRAM devices, allows you to upgrade your system’s performance and enhance its ability to run more programs simultaneously. Test-proven 100% compatibility listed for supported systems. Learn More

Designed for high-performance overclocking on Intel X99 and 100 Series motherboards
Vengeance LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum
for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Each IC is individually screened for performance potential.

Learn More

Designed for high-performance overclocking on Intel X99 and 100 Series motherboards
Vengeance LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum
for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Each IC is individually screened for performance potential.

Learn More

Dominator Platinum high-performance DDR4 memory is designed for world-class Intel 100 Series system builds. It's built with hand-screened ICs and incorporates patented DHX cooling for reliable performance in demanding environments.

Learn More

Vengeance LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.

Learn More

This document describes ValueRAM's KVR21N15S8/8 is a 1G x 64-bit
(8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8,
memory module, based on eight 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2133 timing of
15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers

Learn More

HyperX HX426C15FB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Learn More